Inkl. moms
Con el subwoofer MAUI 11 G3 SUB amplías las propiedades cardioides de nuestra serie profesional de altavoces de columna hasta la zona de graves.
¿Qué significa esto?Simplemente coloca el SUB junto a tu MAUI® 11 G3 con el frontal orientado hacia atrás, activa el preset Cardioid y obtendrás un low-end trasero más atenuado y controlado, manteniendo el impacto hacia delante. Las frecuencias de low-end detrás del sistema se reducen en -15 dB. Para obtener más graves, coloca el SUB en la misma dirección que tu MAUI® 11 G3 y desactiva el preset Cardioid.
La configuración del SUB junto con tu MAUI® 11 G3 es sencilla y rápida. Gracias al sistema automático de detección de configuración, el SUB cambia inmediatamente al modo FOLLOWER, siempre que no haya una columna conectada.
También se recomienda usar una funda protectora y una plataforma con ruedas para facilitar el transporte y mantener el SUB libre de daños de touring el mayor tiempo posible.
MAUI® 11 G3 SUB comparte el mismo diseño constructivo que el subwoofer MAUI® 11 G3 y será el complemento perfecto para mantener tu low-end bajo control.
- Powered 2 x 8" subwoofer with flow-optimised bass-reflex ports
- 2 x 8" custom-designed woofer with deep bass down to 39 Hz
- Preset for cardioid subwoofer configuration
- DynX® DSP (Gen. 2) technology for distortion-free sound at maximum volume
- Automatic Setup Detection (MAIN / FOLLOWER)
- Rugged subwoofer housing made out of polyurea-coated birch plywood
- Shockproof front grille for ultimate speaker protection
- Two ergonomic handles for easy handling
General
| Peak output power | 1,460 W |
| RMS output power | 730 W |
| Amp class | Class D |
| SysLink® | Yes |
| Max. SPL peak | 125 dB |
| Frequency response (-10 dB, rel. Avg) | 39 - 200 Hz |
| Number of inputs | 2 |
| Input connector types | XLR combo socket |
| Number of outputs | 3 |
| Output connector types | XLR 3-pole male |
| Protection features | Direct current |
| Protection features | Multiband Limiter |
| Protection features | Overheating |
| Protection features | Short circuit |
| Colour | Black |
Bluetooth®
| Bluetooth® version | Bluetooth® 4.2 |
| Features | App control |
| Features | Audio Streaming (A2DP) |
| Features | TrueWireless™ Mirroring |
| Features | TrueWireless™ Stereo |
| Supported audio codecs | AAC |
| Supported audio codecs | SBC |
Outputs
| Number of speaker outputs | 1 |
| Speaker output connection type | XLR 3-pole male |
Amplifier
| Number of satellite outputs | 1 |
Bass driver
| Size | 8 " |
| Quantity | 2 |
| Magnet | Ferrite |
| Voice coil | 2 " |
Mains operation
| Operation voltage | 110 V AC - 120 V AC / 50 - 60 Hz |
| Operation voltage | 220 V AC - 240 V AC / 50 - 60 Hz |
| Power supply type | Switched-mode power supply (SMPS) |
| Mains connector | Mains socket indoor power in male & powerCON® |
| Mains fuse | T3.15AL/250 V |
Housing
| Design | Bass reflex |
| Number of handles | 1 |
| Chassis material | Birch multiplex |
| Material thickness | 15 mm |
| Front grille material | Aluminium |
Cooling
| Cooling system | Convection cooling |
Environmental
| Ambient temperature | 0 - 40 °C |
| Maximum air humidity (non-condensing) | 80 % |
Dimensions & weight
| Width | 305 mm |
| Height | 607 mm |
| Depth | 403 mm |
| Weight | 20.5 kg |
Other properties
| Included accessories | Mains cable |
Si tiene preguntas sobre este producto antes de hacer su pedido, contacte con nuestro equipo – le responderemos lo antes posible y siempre en un plazo de 24 horas en días laborables.
Tengo una pregunta sobre este producto


