Inkl. moms
Con el subwoofer MAUI 11 G3 SUB W amplías las prestaciones cardioides de nuestra serie profesional de altavoces de columna hasta las frecuencias graves.
¿Qué significa esto?Simplemente coloca el SUB junto a tu MAUI® 11 G3 W, orientado hacia atrás, activa el preset Cardioid y obtendrás un low-end más atenuado y controlado en la parte trasera, manteniendo el punch al frente. Las frecuencias low-end detrás del sistema se atenúan en -15 dB. Para más graves, deja el SUB orientado en la misma dirección que tu MAUI® 11 G3 W y desactiva el preset Cardioid.
La configuración del SUB junto con tu MAUI® 11 G3 W es sencilla y rápida. Gracias al sistema automático de detección de configuración, el SUB cambia inmediatamente al modo FOLLOWER, siempre que no haya una columna montada.
También se recomienda usar una funda protectora y una plataforma con ruedas para facilitar el transporte y mantener el SUB libre de daños de gira el mayor tiempo posible.
MAUI® 11 G3 SUB W tiene la misma construcción de diseño que el subwoofer MAUI® 11 G3 W y será el complemento perfecto para controlar tu low-end.
- Powered 2 x 8" subwoofer with flow-optimised bass-reflex ports
- 2 x 8" custom-designed woofer with deep bass down to 39 Hz
- Preset for cardioid subwoofer configuration
- DynX® DSP (Gen. 2) technology for distortion-free sound at maximum volume
- Automatic Setup Detection (MAIN / FOLLOWER)
- Rugged subwoofer housing made out of polyurea-coated birch plywood
- Shockproof front grille for ultimate speaker protection
- Two ergonomic handles for easy handling
General
| Peak output power | 1,460 W |
| RMS output power | 730 W |
| Amp class | Class D |
| SysLink® | Yes |
| Max. SPL peak | 125 dB |
| Frequency response (-10 dB, rel. Avg) | 39 - 200 Hz |
| Number of inputs | 2 |
| Input connector types | XLR combo socket |
| Number of outputs | 3 |
| Output connector types | XLR 3-pole male |
| Protection features | Direct current |
| Protection features | Multiband Limiter |
| Protection features | Overheating |
| Protection features | Short circuit |
| Colour | White |
Bluetooth®
| Bluetooth® version | Bluetooth® 4.2 |
| Features | App control |
| Features | Audio Streaming (A2DP) |
| Features | TrueWireless™ Mirroring |
| Features | TrueWireless™ Stereo |
| Supported audio codecs | AAC |
| Supported audio codecs | SBC |
Outputs
| Number of speaker outputs | 1 |
| Speaker output connection type | XLR 3-pole male |
Amplifier
| Number of satellite outputs | 1 |
Bass driver
| Size | 8 " |
| Quantity | 2 |
| Magnet | Ferrite |
| Voice coil | 2 " |
Mains operation
| Operation voltage | 110 V AC - 120 V AC / 50 - 60 Hz |
| Operation voltage | 220 V AC - 240 V AC / 50 - 60 Hz |
| Power supply type | Switched-mode power supply (SMPS) |
| Mains connector | Mains socket indoor power in male & powerCON® |
| Mains fuse | T3.15AL/250 V |
Housing
| Design | Bass reflex |
| Number of handles | 1 |
| Chassis material | Birch multiplex |
| Material thickness | 15 mm |
| Front grille material | Aluminium |
Cooling
| Cooling system | Convection cooling |
Environmental
| Ambient temperature | 0 - 40 °C |
| Maximum air humidity (non-condensing) | 80 % |
Dimensions & weight
| Width | 305 mm |
| Height | 607 mm |
| Depth | 403 mm |
| Weight | 20.5 kg |
Other properties
| Included accessories | Mains cable |
Si tiene preguntas sobre este producto antes de hacer su pedido, contacte con nuestro equipo – le responderemos lo antes posible y siempre en un plazo de 24 horas en días laborables.
Tengo una pregunta sobre este producto

