Audio-Technica AT2035 Studio Microphone

(0)
€204,00
Incl. IVA

Descripción

  • Micrófono de condensador con patrón polar en forma de riñón
  • Filtro de paso alto conmutable
  • Atenuador de 10 dB
  • 148 dB SPL
  • Incl. soporte antichoque y bolsa


Audio-Technica AT2035 Studio Microphone


Audio-Technica AT2035 is a robust condenser microphone with a cardioid pattern. The microphone uses a 3-pin XLRM output, a maximum sound level input of 148 dB, and a frequency response of 20-20,000 Hz.
 

High pass filter


Audio-Technica AT2035 has a switchable high pass filter at a total of 80 Hz and 10 dB pad. This allows the microphone to handle high sound levels.
 

Accessories


With the purchase of Audio-Technica AT2035, you receive a solid shock mount and a storage bag.

Especificaciones

  • Weight (kg)
    0,5

Más especificaciones

Specifications

 
   
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off:  80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Weight: 403 g (14.2 oz)
Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

SKU: AUD-AT2035
Barcode: 4961310101756