• Spray adhesivo con ancho de spray ajustable
• La cantidad de adhesivo se puede ajustar en la boquilla del spray adhesivo

Spray adhesivo en aerosol

Aerosol de 500 ml con adhesivo en spray.

Ahora puedes obtener adhesivo en aerosol, lo que hace que el trabajo sea más fácil y rápido cuando el adhesivo debe distribuirse en superficies más grandes. El adhesivo en spray se puede utilizar y adhiere bien a una amplia variedad de superficies. 

Adhesivo en spray con ancho de pulverización ajustable

La cantidad de adhesivo se puede ajustar en la boquilla del adhesivo en spray

Resistente a temperaturas de -20°C a +60°C

Specifications

Instructions for use:

1. Shake can before use and spray at a distance of about 15-30 cm on a clean and dry surface (on one side).
For porous surfaces, a two-sided application may be required.
2. Depending on the surface condition and temperature, allow the applied adhesive layer to dry (for approx. 10 minutes), until no 
more threads emerge when dabbing your finger.
3. After the drying time, position the parts and put them together while applying firm pressure.
4. After each use, turn the can upside down and spray for 2 seconds to prevent the nozzle from blocking.

DANGER:

Extremely flammable aerosol. Pressurised container: can burst when heated. Toxic to aquatic life with long lasting effects. Keep 
away from hot surfaces, heat, sparks, naked flames and other ignition sources. Do not smoke during use. Do not spray towards 
a flame or other ignition source. Do not pierce or burn the can, even after use. Avoid release into the environment. Protect from 
direct sunlight and do not expose to temperatures higher than 50°C/122°F. Dispose of this material and its container at a
hazardous or special waste collection point.

Other hazards:

In case of insufficient ventilation and/or through use, flammable and/or explosive mixtures may build up.
The simple and fast adhesive from a spraycan for large-scale surfaces. It bonds many types of materials. Specially designed for 
long-lasting, extra strong bonding of rough and uneven surfaces such as paper, cardboard, felt, fabric, plasticizer-free plastic
foils, foams, padding, rigid foams with each other and itself; as well as onto wood, glass, metal, ceramics (ideal for making 
cases and boxes). The amount of adhesive can be adjusted (high/medium/low) by a special valve. Depending on the material, an 
area of up to 4 m² can be bonded together. Temperature resistant from -20°C to +60°C.

Areas of application:

Particularly well suited for bonding of:
- Felt, PVC foil, synthetic leather, carpeting
- Plastic, cardboard
- Foam and foam rubber
- Insulating materials, flexible foam
- Vinyl, leather
- Rubber, as well as metal and wood
- Upholstery